Introduction of organic fertilizer pellet making machine

A drum organic fertilizer pellet making machine is a molding machine that can make materials into specific shapes. Rotary drum fertilizer prilling machine is one of the key equipments in the compound fertilizer industry, suitable for hot and cold granulation and large-scale production of high, medium and low concentration compound fertilizers.

The main working method is wet granulation of agglomerates. Through a certain amount of water or steam, the basic fertilizer is fully chemically reacted in the cylinder after humidity adjustment. Produce extrusion force to agglomerate into balls.

The staff of Richi Machinery has accumulated many years of experience in the production of compound fertilizers, and the rotary drum organic fertilizer pellet making machine developed by our company has the characteristics of beautiful appearance, simple operation, low energy consumption, long life and convenient maintenance.

1. Organic fertilizer pellet making machine features:

  • Less investment, quick effect, good economic benefit and reliable performance;
  • Low power, no three wastes discharge, stable operation, convenient maintenance, reasonable process layout, advanced technology and low production cost;
  • High ball strength, good appearance quality, corrosion resistance, wear resistance, low energy consumption;
  • The rate of ball formation reaches 70%, there is a small amount of returned material, the particle size of the returned material is small, and it can be re-granulated;
  • The cylinder body of the fertilizer pellet making machine adopts special rubber plate lining or acid-resistant stainless steel lining plate, which realizes automatic scar removal and tumor removal, and cancels the traditional scraper device.
organic fertilizer pellet making machine

2. Organic fertilizer pellet making machine structure overview:

The whole fertilizer pelletizer machine can be divided into four parts:

(1)Bracket part: The entire rotating part of the body is supported by the bracket, and the force is large. Therefore, the bracket part of the machine is welded with medium carbon steel plate and channel steel, and has passed strict quality control and special special equipment.

The organic fertilizer pellet making machine process requirements have reached the purpose of this machine. In addition to this, the more important thing is the supporting roller fixed on the shelf. Considering that it will have greater friction with the rolling joints of the body, RICHI organic fertilizer pellet making machine factory specially selects good anti-corrosion and wear-resistant materials, which greatly improves the service life of the organic fertilizer pellet mill.

 The wheel frame also adopts casting integrated technology, and there are hooks at the four corners of the supporting wheel frame, which is convenient for loading, unloading and transportation.

(2) Transmission part: The transmission part of the whole organic fertilizer pellet making machine is the most important part of the whole machine. The main motor and reducer on the frame are ISO qualified products with reliable quality. The motor drives the pulley, the V-belt and the reducer to drive the main shaft to make the body work.

(3) Large gear: fixed on the body, meshing with the transmission pinion, and driving the body to work in the opposite direction. It adopts high-tech wear-resistant materials, so that the organic fertilizer pellet making machine has a longer service life

(4)Body part: The most important part of the whole fertilizer maker machine is the body part, which is welded with good medium carbon steel plate, and has a special rubber lining plate or acid-resistant stainless steel lining plate built-in to realize automatic scar removal, tumor removal, and cancellation.

 The traditional scraper device is adopted, and strict quality control and special process requirements are adopted to achieve the purpose of this organic fertilizer pellet making machine.

The new generation of MZLH420 bio-organic fertilizer pellet making machine adopts humanized structure and functional design, the equipment runs more smoothly, the maintenance is more convenient, and the operation and use are more worry-free. Animal manure, urban kitchen waste, crop waste, organic solid waste and other raw materials can be made into high-efficiency “organic, pollution-free” biological fertilizers, turning waste into treasure and promoting the circular development of organic agriculture.

3. The equipment of organic fertilizer production line includes:

(1) Granulation equipment:

Wet stirring tooth organic fertilizer pellet making machine, disc granulator, drum fertilizer pellet machine, three-throw circular organic fertilizer pellet mill, multi-function organic fertilizer pellet making machine.

(2) Crushing equipment:

Semi-wet material pulverizer, dripping pulverizer, high-humidity material pulverizer, chain pulverizer, hammer pulverizer, cage pulverizer, urea pulverizer, vertical hammer pulverizer.

(3) Turn over equipment:

Horizontal mixers, heavy duty pan mixers, twin shaft mixers, mandatory twin shaft mixers.

(4) Screening equipment:

Drum screening machine, vibrating screening machine. Used after the organic fertilizer pellet making machine granulation section.

(5) Conveying equipment:

Mobile belt conveyors, bucket elevators, stationary conveyors, large inclination angle conveyors, screw conveyors.

(6) Drying equipment:

Tumble dryer, three-pass dryer, pig manure dryer, chicken manure dryer, cow manure dryer, sheep manure dryer. 

(7) Supporting for organic fertilizer pellet making machine:

Melt shotcrete system, automatic batching system, rotary coating machine, rotary cooler, quantitative packaging scale, mobile turning and polishing machine.

Production process of floating fish feed making machine

With the rapid development of the aquaculture industry, traditional farming methods have been far from meeting people’s needs. The requirements for aquaculture fish feed made by floating fish feed making machine are not only balanced nutrition, good stability of the feed in water, no pollution to water quality, etc., and more stringent requirements are put forward for the environmental quality of fish survival.

The feed produced by the aquaculture floating fish feed making machine is hard pellets, and the other is the extruded feed pellet machine, and the processed fish feed is soft pellets.

Today, Richi Machinery will talk about the extruded feed floating fish feed making machine. The production process generally adopts secondary crushing and secondary ingredient mixing, and then passes through extrusion, drying, external spraying, cooling, crushing and screening to complete the processing of aquatic extruded feed.

1. Raw material cleaning and primary grinding

There are generally two forms of raw materials used in floating fish feed factories: one is powder, which does not need to be coarsely pulverized. For this kind of raw material, it can directly enter the conical cleaning screen to remove impurities after passing through the feeding pit and elevator, and then conduct magnetic separation, and directly enter the batching bin through the distributor or screw auger to participate in the first batching;

The material that needs to be coarsely pulverized—granular material. This kind of material enters the cleaning equipment through the unloading pit and the elevator to enter the cleaning equipment for magnetic separation of impurities, and then enters the to-be-pulverized bin.

For individual raw materials, such as shrimp shells, they can be directly put into the silo to be crushed after magnetic separation without initial sieving.

One-time coarse pulverization is the pretreatment process of ultrafine pulverization in aquatic feed processing. Its main purpose is to reduce the pellet size difference and variation range of materials, improve the working condition of the ultrafine pulverizer, and improve the working efficiency and guarantee of the ultrafine pulverizer.

The product quality is stable; at the same time, in order to improve the working environment of workers and reduce cross-contamination, it is recommended to use an independent dust removal air net, that is, an independent dust removal system for the feeding port.

2. The first batching and mixing

The first batching is mainly the preparation of public raw materials, that is, the preparation of larger materials in the formula. This floating fish feed making machine process is mainly completed by electronic batching scales.

However, in the first batching process, special attention should be paid to the arching problem of the batching bin, which is mainly caused by the light bulk density and poor fluidity of the raw materials of the aquatic feed, especially the high-grade aquatic feed raw materials. Therefore, certain anti-arching measures should be taken for the batching bin, such as the use of eccentric discharge, vibration motor, etc.

The single-shaft horizontal ribbon mixer can be used for the first mixing, and the grease addition system must be considered on the mixer. The first batching and mixing is also the pre-treatment process of ultra-fine pulverization.

This auxiliary equipment of floating fish feed making machine is mainly to reduce the variation range of material pellet size, improve the working condition of the pulverizer, improve the working efficiency of the pulverizer, and ensure the quality of the product.

floating fish feed making machine

3. Secondary crushing and mixing of secondary ingredients

Due to the low food intake, short digestive tract and poor digestive ability of aquatic animals, aquatic feed requires very fine crushing pellet size to increase the surface area of the feed, increase the contact area between the digestive juice of aquatic animals and the feed, and improve the ability of aquatic animals to feed the feed.

At the same time, due to the low intake of aquatic animals, the mixing uniformity of the feed is required to be reflected in a smaller range, which also requires the aquatic feed to have a finer pellet size.

For example, the shrimp feed should all pass through the 40-mesh analytical sieve, and the content on the 60-mesh sieve should be less than 5%, so the micro-grinding process must be adopted.

In the secondary pulverization process, the materials mixed in the first time are lifted by the elevator and then enter the silo to be pulverized, and then enter the micro pulverizer. Micro-pulverizers are generally used in the processing of aquatic feeds, and vertical-axis micro-pulverizers are generally used, which are equipped with powerful wind separation equipment, and then enter the rotary grading screen for screening.

The purpose of configuring the rotary grading screen here is mainly to remove the fine fluff formed by the coarse fibers in the feed during the pulverization process, because the existence of these fine fluff is easy to adhere to the die hole of the floating fish feed making machine until the die hole is blocked, causing Shut down for cleaning, so it must be removed.

The cleaned materials are subjected to secondary batching and mixing. Since the fineness of the materials entering the secondary batching mixing bin is above 60 mesh and the density is small, special attention should be paid to the phenomenon of arching.

In order to prevent this phenomenon, on the one hand, the eccentric sub-expansion hopper can be used, and on the other hand, all the material discharge machines that have undergone ultra-fine grinding use an impeller feeder, which not only has an arch breaking mechanism, but also can flexibly adjust the flow rate. size. Various raw materials enter the secondary mixer after secondary batching.

 There is an artificial feeding port above the secondary mixer, which is mainly used for the addition of trace additives. At the same time, there is a liquid addition mechanism on the mixer for the addition of grease; one is for the addition of water. In the secondary mixing process, various materials must be fully mixed, and the coefficient of variation CV is less than 7%, which is the key to ensuring product quality.

Therefore, the mixer must choose a model with excellent performance, such as double-shaft horizontal paddle mixing It has high mixing uniformity, high output and fast mixing speed. After secondary crushing and secondary ingredient mixing, the material enters the subsequent process—expansion granulation process—with floating fish feed making machine.

4. Extrusion process by floating fish feed making machine

In the extrusion process, the material actually undergoes a cooking process under the conditions of high temperature, high humidity and high pressure.

During this floating fish feed making machine process, the physical and chemical properties of the material changed strongly, and at the moment when the material was extruded from the die hole, the water in the feed was immediately converted from liquid to gaseous state and emitted from the feed because the pressure suddenly dropped from high pressure to about 100kPa.

Thereby, the material is extruded by floating fish feed making machine to form the so-called extruded feed. Because this kind of feed not only has the advantages of general hard pellet feed – good palatability, avoids automatic grading of products, is easy to transport, helps digestion, reduces waste in the feeding process, etc., but also has unique advantages:

 In the feed, the starch has a high degree of gelatinization by floating fish feed making machine, the protein is more digestible, and the utilization rate of the animal feed is improved; it has excellent floatability, which is easy to observe the feeding situation of the fish, and can control the water pollution to the maximum extent. These are also the main reasons why extruded feed is widely used.

There are many kinds of dryers can be used after floating fish feed making machine. When the diameter of the pellets is less than 4mm, a vibrating fluidized bed dryer can be selected; when the diameter of the pellets is greater than 4mm, a belt dryer can be selected, or a horizontal float dryer can be directly selected.

Because this kind of dryer can make the material in a semi-suspended state on the entire screen surface, it can not only ensure the drying effect, but also minimize the damage to the pellets. After the material is dried, it enters the external spraying system.

The external spraying of the pellets is mainly to meet the fish’s energy needs and reduce the loss of heat-sensitive substances during processing. The nutrients that should not be added in the previous process can be supplemented by external spraying, and at the same time, the palatability of the feed can be improved and the powder content can be reduced.

 The optimum working temperature for this process is around 80℃. After the material passes through the external spraying system, it can enter the counter-flow cooler for cooling.

5. Finished product packaging

The cooled material is lifted by the elevator and then crushed into the plane rotary screen for classification. The grading sieve used after floating fish feed making machine is generally a two-layer sieve, and the material on the lower sieve is the finished product, which can be directly entered into the finished product warehouse, and then weighed and packaged. The material on the upper sieve needs to be returned to the crusher for crushing. The material under the lower sieve is generally finely crushed, which can be returned to the batching bin as waste.

The floating fish feed making machine production process analyzed above is the conventional configuration of the current aquatic extruded feed processing technology. Using this process, sinking feed, slow sinking feed and floating feed can be produced.

Although extruded floating fish feed making machine technology has been recognized by many manufacturers as a new type of processing technology, it has not been widely used because its investment is much larger than that of hard pellet feed processing technology.

Nevertheless, the floating fish feed making machine puffing process is the future development trend of the feed processing industry, especially in the application of aquatic animal feed and pet feed, and will definitely replace the traditional hard pellet feed processing technology.

I hope the above related content about floating fish feed making machine is helpful to you. For more information about floating fish feed pellet making machine, you are welcome to consult the staff of Richi Machinery, we will serve you wholeheartedly!

biomass pellet mill

Unstable current of the biomass pellet mill

The ring die and the pressing roller of the biomass pellet mill rotate at a constant speed, and the working state of each instant is basically the same. If the amount of feed material is unchanged, the energy consumption should also be relatively stable, and the current will be reflected on the motor. Also relatively stable.

When the biomass pellet mill machine is working, we adjust the feeding amount as long as the material thickness in the feeding area is less than the maximum starting point of the pressing area, it will directly affect the length of the effective working area of the pressing area and the pressing area, and cause the current to flow.

 The fluctuation and the change of the hourly output of the biomass pellet mill, and if the thickness of the material layer in the feeding area is greater than the maximum starting point of the pressing area, in addition to increasing the thickness of the material layer in the feeding area, it will not affect the hourly output and energy consumption per unit time.

If there is any impact, it will no longer cause changes in current and biomass pellet mill output. Because the thickness of the material layer in the feeding zone exceeds the maximum starting point of the pressing zone, the interval between the pressing zone and the pressing zone is constant without any change.

In the interval where the multi-feed material is located, the clamping angle is greater than the critical friction angle, and the material will not be squeezed into the pressing area.

 In this way, with the increase of the feeding amount of the biomass pellet mill, the balance of in and out is broken, and the in is greater than the out, and the material layer in the feeding area is It will accumulate thicker and thicker until all the gaps are filled and blocked to the feed port, so that the biomass pellet machine cannot work normally. At this time, the current will increase.

In the actual work of the biomass pellet mill, with the adjustment of the feeding amount, the instantaneous output and the current of the main motor will change accordingly. And when the feeding thickness does not exceed the maximum starting point of the pressing area, it will not cause more and more material layers in the feeding area due to the increase in the amount of powder we feed.

As has been said before, the area that can cause instantaneous output and energy consumption changes should be the two areas of work and material layers – the compression area and the biomass pellet machine extrusion area, so we think that the third area mentioned above- – The reasonable existence of the feeding area has certain conditions.

biomass pellet mill

That is to say, the fed material layer is distributed in the compaction area, the extrusion area and the feeding area whose total thickness does not exceed the maximum entry point of the compaction area.

The biomass pellet mill will work normally under the allowable power. If the amount is too large and exceeds the thickness of the maximum starting point of the compaction area, the material layer will accumulate and gradually increase, and the biomass pellet making machine will not work normally. Current is fluctuating.

Through the above analysis, let’s discuss some phenomena exhibited by the biomass pellet mill under two possible working conditions:

When the power of the main motor is not large enough compared with the corresponding biomass pellet mill granulation parameters, the thickness of our feed is at the end of the extrusion zone and the maximum entry point of the compression zone (this will vary with the raw materials, compression ratio, effective length-diameter ratio, humidity, pressure rollers and other variable factors to adjust accordingly), generally will not exceed the maximum starting point, with the increase of the feeding amount, the compression area will change accordingly.

The length of the interval will be shortened, and the interval length of the squeeze area will gradually increase accordingly, and the current of the main motor will also gradually increase until it reaches the maximum allowable use.

If the current reaches the protection value we set, and the thickness of the feeding material has not exceeded the thickness of the maximum starting point of the biomass pellet machine pressing area, if the feeding amount is increased, the safety system will act, and the excess powder will be discharged. In order to ensure the normal function of biomass pellets.

Suppose the power of the main motor is very large or the motor fails to overload after the thickness of the feeding material exceeds the thickness of the maximum starting point of the pressing area due to the comprehensive changes of many variables.

At this time, the powder fed to the people cannot increase the time output, nor will it cause the increase of the main motor current, but can only continue to increase the powder pile accumulated in the machine until the inner cavity of the biomass pellet press machine is blocked.

Cause the biomass pellet mill to not work properly. Of course, this special phenomenon rarely occurs in actual production (if the raw material moisture is too large, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, the raw material is replaced, etc., this phenomenon may occur), this is our undesired conditions.

In-depth analysis of the first commonly used working state, it is not difficult to know that on the premise that the relevant conditions are unchanged, with the change of the feeding amount, the interval length of the compression zone and the extrusion zone is within a certain range Corresponding changes are also made (the feed flow rate is reduced, the length of the extrusion zone is reduced, and the length of the compression zone is prolonged; otherwise, the extrusion zone is extended and the compression zone is shortened), and the feeding amount does not exceed the pressure.

When the thickness of the maximum starting point of the tight area is concerned, the lengths of the above two intervals are not a constant value when this article is written. The larger the extrusion zone length value, the higher the biomass pellet maker production efficiency and the longer the pellet length per extrusion per roller.

Therefore, it is concluded that the factors of current instability under the condition of controlling the feeding amount need to be investigated from the moisture content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, and the raw materials are replaced.

wood pellet mill for sale

What are the types of wood pellet mill?

The wood pellet mill produces finished wood pellets by crushing, drying, screening, granulating, cooling, packing and other raw materials such as sawdust, branches, straw, nut shells, waste wood and other raw materials. It is a wood pelletizing equipment for the production of wood pellets and a new biomass energy equipment.

Its finished products are used in biomass power generation, boilers, fireplaces, household equipment, etc., meeting the particularity of the needs of many industries, and will have broad market prospects in the next few years, and the prospects are very bright.

The rapid growth of the wood pellet mill machine industry has solved the fuel problem in many fields. Enterprises of different sizes in the industry have also sprung up, and the competition in the industry has enabled enterprises to continuously improve the quality and production efficiency of their wood pellet mills.

When customers purchasing wood pellet mills select pellet machine manufacturers online, if the price of biomass fuel pellet machine equipment is much lower than the market price, try not to choose, because you get what you pay for, and the products you buy at low prices, Quality is not necessarily reliable!

Richi Machinery is an biomass fuel making equipment manufacturer specializing in the wood pellet mills for sale, if you are interested in our wood pellet factory  and wood pellet line projects and solutions, please leave your needs and email, WhatsApp and other contact information, our sales staff will provide professional answers and corresponding product pictures, videos and quotations.

1. RICHI wood pellet mill for sale

At present, there are generally 3 types of sawdust wood pellet mill for sale:

(1) Flat die sawdust wood pellet mill

This is an improved model of the earliest wood pellet mill machine, which is mostly used for the processing of small fuel pellets, and the output is relatively low. With the increase of the abrasive tool, the overhang of the flat die is too large, and it is easy to break the die after being stressed. (Related post: Wood Pellet Mill For Sale)

(2) Horizontal Ring Die Wood Granulator

This is a pure wood pellet mill equipment modification machine, and the wood pellet making machine manufacturer has put it into the production of biomass fuel after a little improvement. Because the proportion of feed raw materials and biomass fuel is very different, it is difficult to solve the problem that the main shaft bearing is easily damaged during the operation of the equipment, and the situation of the equipment simmering often occurs.

(3) Ring die biomass wood pellet mill

This is an equipment specially designed for biomass pellet fuel processing. It is currently the most advanced equipment in China and is specially used for special planes. After more than ten years of market verification, it has been recognized by customers across the country.

2. The past and present of biomass wood pellet mill

Biomass wood pellet mill is a professional mechanical equipment for rolling straw pellets. It is mainly used to produce energy pellets, feed pellets, fertilizer pellets and other products. (Related post: biomass wood pellet plant in Indonesia)

The biomass wood pellet mill is a straw pellet rolling equipment extended from the feed pellet machine. Therefore, the international biomass pellet machine is mainly distributed in European and American countries, and it is an indispensable production tool for farm operation.

The domestic biomass pellet machines are mainly represented by Jiangsu, Shanghai, Shandong and Henan. The biomass wood pellet mill machines start from here and extend to the whole country.

The users of biomass wood pellet mill in my country are mainly distributed in the north. It evolved from feed pellet machines. In the early stage of evolution, straw pellets were mainly made into cattle and sheep feed. Later, due to the emergence of the slogan of energy saving and environmental protection, the price of coal rose. , changes in the urban environment, straw briquetting, straw pellets gradually penetrated into the biomass energy industry, biomass pellet machine came into being.

Now, biomass wood pellet mill, as a professional machinery for rolling feed pellets, is widely distributed in the north and south of my country. It is an inseparable close partner of the breeding industry and plays an important role in the development of animal husbandry.

In terms of fertilizer, the biomass wood pellet mill mainly crushes the straw, adds animal manure for fermentation, and then extrudes it into fertilizer pellets, which is a modern practical version of farmyard manure.

 3. The significance of sawdust wood pellet mill in biomass energy

Sawdust wood pellet mill is a kind of mechanical equipment that uses the interaction principle of extrusion force and friction force between the pressing wheel and the die to shape the material.

During the processing process, there is no need to add any additives or binders. It is a biomass energy source. Environmentally friendly equipment used. With the growth of the national economy, the market demand for sawdust pellet machines continues to rise.

In recent years, China has actively promoted the development and utilization of biomass energy, and key fields such as biomass power generation, biomass gas, and biomass liquid fuel have flourished. my country has abundant biological natural resources and available resources. (Related post: fuel pellet plant)

In addition to plants and terrestrial and marine organisms, there are straws, residual garbage, livestock and poultry manure, industrial and domestic sewage, etc. In my country’s energy development strategy, biomass energy has a special and irreplaceable role.

In this era when countries around the world vigorously advocate energy conservation and emission reduction, the development and utilization of biomass energy is of great significance to the development of mankind.

With the gradual maturity of biomass energy utilization technology in all walks of life in my country, the utilization and production of sawdust pellet machines have been further developed.

The sawdust wood pellet mill meets the development requirements of the national circular economy, plays an increasingly important role in my country’s economic development, and has been recognized by the country.

Richi Machinery is an equipment manufacturer specializing in the wood pellet mills for sale, if you are interested in our wood and biofuel pellet mill plant projects and solutions, please leave your needs and email, WhatsApp and other contact information, our sales staff will provide professional answers and corresponding product pictures, videos and quotations.

If you want to know more about wood pellet mill for sale United States, wood pellet mill for sale Macedonia, wood pellet mill for sale Germany, wood pellet mill for sale Japan, wood pellet mill for sale Malaysia, wood pellet mill for sale Thailand, wood pellet mill for sale Netherlands, please contact Richi Machinery for details.

Why is poultry pellet machine matter?

Why is the poultry pellet machine the most important equipment in poultry feed processing? With the rise of the breeding industry, automated machinery replaces labor, poultry pellet machines have entered thousands of households, and poultry feed processing equipment has become the right-hand man of feed processing plants.

Poultry pellet machines are divided into single machines and complete sets of equipment, which are independently developed by Richi Machinery .The single poultry feed pellet making machine is very simple to operate, and only one person can easily produce it, saving time and effort, improving work efficiency and reducing costs for users. (The output of RICHI poultry feed pellet making machine ranges from 1 ton/hour to 48 tons, and the models are complete) High-efficiency and worry-free breeding has become the demand of farmers.

At the same time, the advantages of the poultry pellet machine are also the most valued by farmers, so what are the advantages of the poultry pellet machine?

(1) It can improve work efficiency for users, reduce feeding costs and increase profits.

(2) Poultry pellet machine can ensure the comprehensive nutrition of livestock and poultry. Feeding pellet feed can increase animal feed intake, avoid animal picky eating, facilitate digestion and absorption, and shorten growth cycle.

(3) It can not only suppress cattle and sheep feed pellets, but also process pig, chicken, duck, goose, and aquatic fish feed pellets, all of which are multifunctional feed pellet machine equipment.

(4) It is convenient for transportation and convenient for storage, and can be stored for half a year. (Related case: feed mill plant in Uzbekistan)

1.How much is a set of poultry feed pellet making machine?

poultry pellet machine

First of all, the user must determine what feed to use, what raw materials to use, what poultry livestock to breed, the demand for output, the requirements for power, and so on. The price of poultry pellet machine ranges from $7,000 to $100,000. Users can purchase suitable models according to actual use and input costs. (For more: RICHI pellet machine)

Among many customer inquiries, the largest proportion is the customer who is engaged in poultry farming. During the consultation, poultry farming customers will first ask a series of questions such as the price of the product, the output of the poultry pellet machine, and how the formula is suitable for poultry feeding.

Although these issues are the most important factors in choosing a poultry pellet machine, as consumers, we must not ignore the resources around us combined with the use of a poultry feed pellet making machine. Raw material + feed pellet machine, to achieve a good effect of the production cost.

(1) When customers purchase a poultry pellet machine, in addition to providing us with the approximate required output and whether three-phase electricity is available, the most important thing is the issue of raw materials. Customers need to make feed according to their own local advantageous resources, which are actually sufficient local raw materials. The use of sufficient raw materials can reduce costs while paying attention to the nutrient absorption of the feed.

(2) Secondly, it is necessary to choose safe formula raw materials, although our poultry pellet making machine will kill various parasite eggs and other pathogenic microorganisms through high temperature during the production process, and reduce various worms and digestive system diseases.

However, for the healthy breeding of poultry, during the configuration process, attention should be paid to the palatability of poultry feed and the balanced absorption of nutrients. Never choose moldy and deteriorated raw materials to make feed pellets.

(3) In the end, it is the problem of raw material moisture for poultry feed pellet making machine. For different raw materials in different places, the moisture control is different.

The moisture content of corn is about 14%-15%, the moisture content of soybean meal is about 13%, and the moisture content of wheat bran is about 13%. It is about 12%-18%, so the water content of various raw materials is different, we must pay attention to this problem.

Therefore, in the production process of the poultry pellet machine, in addition to the quality of the feed pellet machine itself, the most important thing is the problem of raw materials. Control and select the raw materials, buy our feed pellet machine, make your breeding business easier and more convenient.

2.Advantages of formed feed pelletsby poultry pellet machine:

(1) The texture of the feed is hard, which conforms to the characteristics of the gnawing animals of poultry, pigs, cattle and sheep, and improves the palatability of the feed;

(2) The produced granules by poultry pellet machine have smooth surface and high hardness. They are internally matured through high temperature and high pressure, and have a strong paste aroma;

(3) The conversion rate of nutrient absorption is increased by 300%, non-toxic and sterile, which can improve the digestion and absorption of nutrients. The pellet formation process can denature the pancreatic enzyme resistance factor in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various worms and digestive system diseases;

(4) The volume of raw materials is doubled after compression, which is convenient for long-term storage and transportation. (5) Compared with mixed powder feed, pellets made by poultry pellet machine can obtain higher economic benefits.

3.Ancillary products of poultry pellet machine:

The screw feeder of the poultry pellet machine is to feed the pellet machine more efficiently, the feeding is uniform, the speed is adjustable, the impact of the motor current of the poultry feed pellet making machine is reduced, and the motor can also be protected. The screw feeder is an accessory product.

The whole poultry feed pellet machine does not include the screw feeder, which can be purchased according to user needs. Attach the feeder parameters:

(1) Bulk density of raw materials: 500-2500kg/m3

(2) Poultry feed pellet making machine output: 1-48t/h.

(3) The motor power is 1.5kw, frequency conversion motor, with frequency converter control.

(4) The diameter of the discharge port is φ114mm, and the distance between the discharge port and the ground is 1750mm. The distance between the discharge port and the edge of the chassis is 410mm.

(5) The volume of the poultry pellet machine feeding hopper is about 0.06m3.

(6) The feeder is movable as a whole, and the wheels are locked.